JCB & Sons - Blog - Licensed Carpenters and Builders, Hanover, Durham, Owen Sound
Monday, April 17, 2017
BLOG HAS MOVED
We are excited to announce our new website and blog which has all of this content as well at: www.jcbandsons.com Please click the link.
Thursday, March 30, 2017
WEST GREY ONTARIO MASTER BEDROOM WALK IN CLOSET BUILD | JCB AND SONS
All of the Cabinets were full 3/4" Plycore Maple Veneer Construction.
The face frames were all built using a very traditional mortise and tenon joint. Making a very durable quality connection of the styles and rails.
These are the Tenons that will make the connection with all the mortises.
All of the drawer boxes were made using soft maple and blind dovetails cut onsite at our shop.
We used all solid Hard Maple for the face frames and classic styled raised panel doors which were also all milled and built in our shop.
Milling the styles and rails on our spindle molder.
The completed cabinets where than sprayed with 3 coats of Lacquer to provide a very high quality durable finish.
These 8' Maple mirrored doors were installed on high quality Johnson hardware and glide effortlessly as sliding doors should.
All of the shelving received solid maple nosing verses the typical edgebanding you see on cabinet shelving.
The drywall beam used to support the ceiling after removing a dividing wall was a great place to use some Trim Tex Step-A-Bull Corner beads for a great detail.
The closets also received Maple built ins in the closets on top of the adjustable wire rack shelving and they also received full face frames.
Sunday, February 12, 2017
DINING ROOM REMODEL FOR LISTOWEL DAIRY QUEEN | JCB AND SONS
Custom Millwork for Listowel Dairy Queen | JCB & SONS. We recently completed a dining room remodel for Listowel Dairy Queen. We spent a few days on site installing new table tops on all the booths. We also added a new high bar with chairs. All of the new counters and table tops were custom made at Browns Custom Kitchens.
The new bar top mounts as well as the new custom made table legs were made for us by Weldor Metal. They were Powder coated by Sandian Designs Inc.
Pepsi disconnected and reconnected the Pop Machine while we changed out the Pop Cabinet which was custom made by us with 3/4" Ply Core Maple Veneer with a lacquer finish. We made a solid 1-1/2" Fir Plywood top which was clad in Stainless Steel made by Behrns Metal Fabricating and was welded by Weldor Metal.
We used 4 of the original benches from the booths and connected them to make two new longer benches to go with the new tables. We installed the benches on a new Ply-Core Maple Veneered custom drawer base creating some much needed storage space for the restaurant. We also used a push to open drawer slide to eliminate handles sticking out into the traffic flowing through the restaurant.
We spent a lot of time in the design stage to ad some more seating as well as more comfortable seating to the restaurant. Garbage cans were incorporated into the pop cabinet as well as a place for the high chairs for young children.
We spent quite a bit of time with the owner Amy of Dairy Queen designing this project to fit her specific needs. Trying to incorporate the colours of Dairy Queen, the flow of the restaurant and more seating as well as comfortable seating for her dining room.
The new bar top mounts as well as the new custom made table legs were made for us by Weldor Metal. They were Powder coated by Sandian Designs Inc.
Pepsi disconnected and reconnected the Pop Machine while we changed out the Pop Cabinet which was custom made by us with 3/4" Ply Core Maple Veneer with a lacquer finish. We made a solid 1-1/2" Fir Plywood top which was clad in Stainless Steel made by Behrns Metal Fabricating and was welded by Weldor Metal.
We used 4 of the original benches from the booths and connected them to make two new longer benches to go with the new tables. We installed the benches on a new Ply-Core Maple Veneered custom drawer base creating some much needed storage space for the restaurant. We also used a push to open drawer slide to eliminate handles sticking out into the traffic flowing through the restaurant.
We spent a lot of time in the design stage to ad some more seating as well as more comfortable seating to the restaurant. Garbage cans were incorporated into the pop cabinet as well as a place for the high chairs for young children.
Labels:
Builders,
Cabinetry,
Carpenters,
Custom Woodworking,
Moldings & Millwork
Subscribe to:
Posts (Atom)