All of the Cabinets were full 3/4" Plycore Maple Veneer Construction.
The face frames were all built using a very traditional mortise and tenon joint. Making a very durable quality connection of the styles and rails.
These are the Tenons that will make the connection with all the mortises.
All of the drawer boxes were made using soft maple and blind dovetails cut onsite at our shop.
We used all solid Hard Maple for the face frames and classic styled raised panel doors which were also all milled and built in our shop.
Milling the styles and rails on our spindle molder.
The completed cabinets where than sprayed with 3 coats of Lacquer to provide a very high quality durable finish.
These 8' Maple mirrored doors were installed on high quality Johnson hardware and glide effortlessly as sliding doors should.
All of the shelving received solid maple nosing verses the typical edgebanding you see on cabinet shelving.
The drywall beam used to support the ceiling after removing a dividing wall was a great place to use some Trim Tex Step-A-Bull Corner beads for a great detail.
The closets also received Maple built ins in the closets on top of the adjustable wire rack shelving and they also received full face frames.
https://www.facebook.com/16000woodworkingProject/
ReplyDelete